|
|
  
Surface Profile Gauge
|
|  The Digital Surface Profile Gauge will allow the peak to valley height of blast cleaned surfaces to be accurately measured in accordance with the ASTM standard. Caltech’s Digital Surface Profile Gauge is highly useful and users friendly tool for paint, coating, and corrosion inspection.
The Gauge is initially set to zero with the glass zero plate and the foot is then placed on the blasted profile. The foot sits on top of the peaks and the sharp stylus travels to the bottom of the valley, allowing the gauge to display the peak to valley height. A number of measurements can be made and the average can be taken.
In addition, the Gauge can also be used to measure the effects of corrosion i.e. pitting and cavity depth etc. Instrument is supplied with calibration certificate traceable to national standards.
Supplied in Carrying Case with Glass Zero Plate, Alen Key, and Battery fitted.
An analogue Surface Profile Gauge is also available.
Surface Profile Gauges :
R1005 : Analogue Profile Gauge (2µm resolution)
R1020 : Digital Profile Gauge (1µm resolution)
|
| | |
|
|
